Auteur Topic: Mitsubishi Carisma (avance) frontsplitter  (gelezen 30000 keer)

0 leden en 1 gast bekijken dit topic.

cross90

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #15 Gepost op: maart 02, 2012, 05:26:22 pm »
Here is a picture of the splitter and the car :)




Mitsubishi Owners Club Forum

Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #15 Gepost op: maart 02, 2012, 05:26:22 pm »

Prowler

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #16 Gepost op: maart 02, 2012, 06:26:41 pm »
Looks great mate  ;)

Evo driver

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #17 Gepost op: maart 03, 2012, 12:56:32 am »
YEah looks great, but I've searcht for you but still no manual found.

But when you take off the bumper or you have a picture of the inside of the bumper I can tell you what to do.
I've mount them a lot on the carisma's on my work but all the manuals are gone ....

sorry.

Remco

cross90

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #18 Gepost op: maart 03, 2012, 05:28:57 pm »
ok, i have removed the bumper now,
and here are some pictures, from behind the bumper














Is the splitter gona be going over, or under the fittings from the car bumper, if you know what i mean.  ;D

cross90

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #19 Gepost op: maart 03, 2012, 05:59:08 pm »
and the screws fore the splitter, and + 2 mounting brackets fore the splitter (not on the picture)



Evo driver

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #20 Gepost op: maart 03, 2012, 11:46:48 pm »
First off all my drawing skills are a little bid low :D but I hope you will understand what I mean.


 
In the 3 red circles you see 3 sleeves. In each corner of the sleeve you drill a hole of 3,5 to 4 mm. Then you need a knife to cut out the sleeves. Take a paint stripper or a hairdryer to warm it up so it will cut easily. Don't make it to hot or the paint is going to burn off your bumper.
You do it twice at each corner on the left and right.

 

 
Then you drill on the stamped circles on the yellow points a hole of 8 mm. You need to do it 5 times.

 

 
First you need to slide the bolts no 1 into the holes on the front splitter on position B.
And you can mount the splitter on the bumper. Sometimes if the splitter doesn’t fit in the sleeves you need to make them bigger but not to big off course.
Then you hit them hard to get the mounting points a trough the bumper.
Then you use the plates no 2 on the 5 bolts in the middle of the bumper and put the nut no 3 to Finnish it off.
Then there are also 2 black brackets in the box you need to lay it on the corners and mount them with the bolds no 4.
No 5 and the clip between no 1 and 4 you need them to mount are perfect on the plastic trims under the car..

I Hope you have something on this how to.
Please take a picture when it is on your car !!

Good luck with the assembly

Regards

Remco

cross90

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #21 Gepost op: maart 04, 2012, 05:35:27 pm »
Thanks fore the information, it realy helped.


I must say that the work on removing the bumper wan't realy an easy jobb, but at last i got it off my car.
fortunalely the work on geting the bumper on the car, was mutch easyer.


hare are som pictures of me assembling the bumper



And finaly finish.








Tnx again fore helping me, I really appreciate it.  ;D ;D






Eclipse2G

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #22 Gepost op: maart 04, 2012, 05:43:55 pm »
Looks good!!

Sent from my LG-P990 using Tapatalk

jesse2g

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #23 Gepost op: maart 04, 2012, 05:46:42 pm »
Tight.

Evo driver

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #24 Gepost op: maart 05, 2012, 05:31:02 pm »
YEah nice work !! And it looks great on the car !!

DannyColt12v

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #25 Gepost op: maart 05, 2012, 05:50:47 pm »
looks great :D
 
should wrap in carbon wrap :P

Offline proditaki

  • Gewaardeerd Forumlid
  • *****
  • Berichten: 142
  • Geslacht: Man
  • Autotype: Carisma MSX (140 pk) (projectje :))
  • Jaartal: 1995
  • Kleur: Blauw T46
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #26 Gepost op: maart 14, 2012, 09:30:46 pm »
I have the same on, only we smoothed the joint of and painted it..

cross90

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #27 Gepost op: maart 19, 2012, 05:04:59 pm »
That looks great.
i was supposed to do the same,but i dont want to spend more money on the bumper, it is realy expencive whit a paint jobb on those parts, especially in norway. where im from :(


but have you done the same with the side skirt. ? (painted them) ;D

Offline proditaki

  • Gewaardeerd Forumlid
  • *****
  • Berichten: 142
  • Geslacht: Man
  • Autotype: Carisma MSX (140 pk) (projectje :))
  • Jaartal: 1995
  • Kleur: Blauw T46
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #28 Gepost op: maart 21, 2012, 10:29:44 am »
Sideskirts are painted too, ofcourse  :D

Lancer15gli

  • Gast
Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #29 Gepost op: maart 21, 2012, 12:02:32 pm »
pics or it didnt happen :P

Mitsubishi Owners Club Forum

Re: Mitsubishi Carisma (avance) frontsplitter
« Reactie #29 Gepost op: maart 21, 2012, 12:02:32 pm »