Hi
I'm looking for a frontsplitter for a carisma 1.8 advance
i live in Norway, and i am a member of [size=78%]http://www.mitsubishi-klubben.no/index.php?option=com_content&task=view&id=54&Itemid=1 (http://www.mitsubishi-klubben.no/index.php?option=com_content&task=view&id=54&Itemid=1)[/size] (mitsubishi owners club Norway)
but there is nothing fore sale there. (or in Norway)
Where can i get this front splitter. Can i buy one used, from nl, or somewhere els
(http://i39.tinypic.com/2dhwns1.jpg)
This bumperlip is an origional Mitsubishi part. If you go to your local Mitsu dealer, they should be able to import it for you. Here in the Netherlands it costs new € 99,- as far as i know.
I think that aftermarket bumperlips don't exist (anymore) for the Carisma.
also for space star ? not yet ? :P
Citim nga: Nfx ne Shkurt 06, 2012, 10:00:38 MD
This bumperlip is an origional Mitsubishi part. If you go to your local Mitsu dealer, they should be able to import it for you. Here in the Netherlands it costs new € 99,- as far as i know.
I think that aftermarket bumperlips don't exist (anymore) for the Carisma.
Aftermarket lips do exist ;) look on ebay and you find one,it looks better than the one in the picture
ok. i will check up on my lockal mitsubishi dealer.
is there someone on this forum who can sell me this part (used) or new. ?
I've send you a PB with the price for new part.
these are also available for Carisma
(http://i.ebayimg.com/00/s/MzczWDU0MQ==/$(KGrHqV,!i8E5el+JEZyBOb)V8Jeuw~~60_12.JPG)
http://www.ebay.nl/itm/MITSUBISHI-CARISMA-95-99-FRONT-BUMPER-SPOILER-TUNING-GT-/200525235942?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2eb03c46e6 (http://www.ebay.nl/itm/MITSUBISHI-CARISMA-95-99-FRONT-BUMPER-SPOILER-TUNING-GT-/200525235942?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2eb03c46e6)
and rear
(http://i.ebayimg.com/00/s/NDIyWDU4OQ==/$(KGrHqJ,!hIE5ok,Psw3BOb)TK1QKQ~~60_12.JPG)
http://www.ebay.nl/itm/MITSUBISHI-CARISMA-95-99-REAR-BUMPER-SPOILER-TUNING-GT-/200524418284?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2eb02fccec (http://www.ebay.nl/itm/MITSUBISHI-CARISMA-95-99-REAR-BUMPER-SPOILER-TUNING-GT-/200524418284?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2eb02fccec)
That's EVO 4 front lip :o
is that so... :P
almost bought it to put it on my colt,cause i couldnt find a original lip but i did so :P
I used to have that exact front spoiler on my bumper.
Mine was not made out of fiberglass but ABS (bumperlike material, so it's less likely to break). I was very pleased with it until someone decided to run into my car and ruin it.
These "better" parts were made by Vestatec, but they stopped producing them.
The glassfiber parts will eventualy break as they cannot handle much stress. So i wouldn't advise to buy those.
If you can find a Vestatec one (extremely hard to find), i would suggest you get that one, otherwise stick with the original front spoiler.
abs will break as well ;)
mine front bumper lip is from PU,bend it like you want and it pops back in shape..
Well than its pu. Mine hit quite.some speedbumps etc but never broke. It took a hit from another. Car to break.it. Still not beyond repair, but with the lowered suspention its just to low, so i wanted something else.
ok. today i got my frontsplitter from Netherland (tnx Remco Vrolijk, and MD.preformance)
i will uppload a picture :)
but cane someone give me any advice on how to install the splitter :) ;D
i suggest screw it for better hold on the bumper!!
Yes offcourse no problem !!
First you have to take off the front bumper.
And on the innerside you can see some sleeves pressed in the bumper. You have to cut out those.
And in the middle you have to drill some holes I think it was 8 mm for the bolts.
I will look for you to get some more info.
Remco
Here is a picture of the splitter and the car :)
(http://i44.tinypic.com/xo4fte.jpg)
(http://i44.tinypic.com/106euit.jpg)
Looks great mate ;)
YEah looks great, but I've searcht for you but still no manual found.
But when you take off the bumper or you have a picture of the inside of the bumper I can tell you what to do.
I've mount them a lot on the carisma's on my work but all the manuals are gone ....
sorry.
Remco
ok, i have removed the bumper now,
and here are some pictures, from behind the bumper
(http://i39.tinypic.com/25f1s76.jpg)
(http://i40.tinypic.com/2d29400.jpg)
(http://i44.tinypic.com/35ddpjn.jpg)
(http://i41.tinypic.com/fwrvy9.jpg)
Is the splitter gona be going over, or under the fittings from the car bumper, if you know what i mean. ;D
and the screws fore the splitter, and + 2 mounting brackets fore the splitter (not on the picture)
(http://i40.tinypic.com/14veq1.jpg)
First off all my drawing skills are a little bid low :D but I hope you will understand what I mean.
(http://img12.imageshack.us/img12/8849/35ddpjn.jpg)
In the 3 red circles you see 3 sleeves. In each corner of the sleeve you drill a hole of 3,5 to 4 mm. Then you need a knife to cut out the sleeves. Take a paint stripper or a hairdryer to warm it up so it will cut easily. Don't make it to hot or the paint is going to burn off your bumper.
You do it twice at each corner on the left and right.
(http://img41.imageshack.us/img41/1879/2d29400.jpg)
Then you drill on the stamped circles on the yellow points a hole of 8 mm. You need to do it 5 times.
(http://img94.imageshack.us/img94/2112/14veq1.jpg)
First you need to slide the bolts no 1 into the holes on the front splitter on position B.
And you can mount the splitter on the bumper. Sometimes if the splitter doesn't fit in the sleeves you need to make them bigger but not to big off course.
Then you hit them hard to get the mounting points a trough the bumper.
Then you use the plates no 2 on the 5 bolts in the middle of the bumper and put the nut no 3 to Finnish it off.
Then there are also 2 black brackets in the box you need to lay it on the corners and mount them with the bolds no 4.
No 5 and the clip between no 1 and 4 you need them to mount are perfect on the plastic trims under the car..
I Hope you have something on this how to.
Please take a picture when it is on your car !!
Good luck with the assembly
Regards
Remco
Thanks fore the information, it realy helped.
I must say that the work on removing the bumper wan't realy an easy jobb, but at last i got it off my car.
fortunalely the work on geting the bumper on the car, was mutch easyer.
hare are som pictures of me assembling the bumper
(http://i43.tinypic.com/mjoj93.jpg)
And finaly finish.
(http://i41.tinypic.com/2uif60n.jpg)
(http://i44.tinypic.com/fjow3a.jpg)
Tnx again fore helping me, I really appreciate it. ;D ;D
Looks good!!
Sent from my LG-P990 using Tapatalk
Tight.
YEah nice work !! And it looks great on the car !!
looks great :D
should wrap in carbon wrap :P
I have the same on, only we smoothed the joint of and painted it..
(http://members.chello.nl/~g.pollmann/nieuwelip.jpg)
That looks great.
i was supposed to do the same,but i dont want to spend more money on the bumper, it is realy expencive whit a paint jobb on those parts, especially in norway. where im from :(
but have you done the same with the side skirt. ? (painted them) ;D
Sideskirts are painted too, ofcourse :D
pics or it didnt happen :P
(http://img841.imageshack.us/img841/7783/img20110913wa0001.jpg) (http://imageshack.us/photo/my-images/841/img20110913wa0001.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Can you see it on this picture? otherwise i will make a new one shortly.
Make that new one shortly cant wait
nice rims btw
no cant see it, :( upload a new one :)
Hi. I looking for this frontsplitter in Poland. I can't find any for sell :( Where I can buy it? How much this frontsplitter cost?
Sorry for my English :D
Dear Xluki
Witch one are you looking for ? We (md-performance) has arranged a splitter for cross90. And we are able to send it to poland.
Please send us a email and we will awnser your questions. info@md-performance.nl
Regards,
Remco
I looking for splitter just like for cross90. My email: lukaszbawol26@wp.pl